您好!欢迎光临河北航信仪器制造有限公司网站!主要生产销售各类试验箱、养护箱产品。
 ※ 返回首页 ※ 联系我们  ※ 在线留言
<
仪器生产销售一站式制造供应商
设计定制、生产加工、整机装配、设备接线
客户咨询服务热线:
13303377029
应用案例
您的位置: 工程质量仪器 > 应用案例 > 出口公路仪器案例

出口公路仪器案例

作者:admin    发布时间:2020-03-03 12:58     浏览次数 :


序号 物资名称 型号规格 质量标准 技术要求 计量单位 需用数量 单价 金额
1 Set of ASTM stainless steel Sieves diameter 300 mm including, but not limited to, the following aperture sizes: 75.0 mm; 63.0 mm; 50.0 mm; 37.5 mm; 26.5 mm; 19.0 mm; 16.0mm; 12.5 mm; 9.5 mm; 6.3 mm; 4.75 mm; 4.0 mm, including lid and receiver.ASTM不锈钢方孔筛,包括筛盖和筛底。 直径300 mm,孔径:75.0 mm;63.0 mm;50.0 mm;37.5 mm;26.5 mm;19.0 mm;16.0 mm;12.5 mm;9.5 mm;6.3 mm;4.75 mm;4.0 mm。   3    
2 Set of ASTM stainless steel Sieves diameter 200 mm including, but not limited to, the following aperture sizes: 2.0  mm;  1.70  mm;  1.00  mm;  600   micron;   500   micron; 425 micron; 300 micron; 150 micron; 125 micron; 75 micron, including lid and receiver.ASTM不锈钢方孔筛,包括筛盖和筛底。 直径200 mm,孔径:2.0 mm;1.70 mm;1.00 mm;0.6mm;0.5mm;0.425mm;0.3mm;0.15mm;0.125mm;0.075mm。   3    
3 Sieve brush, double-ended nylon筛子刷   双头尼龙 4    
4 200 mm diameter x 200 mm deep washing sieve with 75 micron mesh筛网0.075mm的洗涤筛 直径200 mm、深度200 mm   2    
5 Sieve shaker, gyratory for 200 and 300 mm dia. sieves摇筛仪 直径300 mm   1    
6 Electronic   weighing scale/balance, 3.5kg   capacity, 0.1   gaccuracy, calibrated with underwater weighing capability电子秤/天平,3.5 kg/0.1g,水下称重能力校准 3.5 kg/0.1g 水下称重能力校准 4    
7 Electronic  weighing  scale/balance,   0.25kg  capacity,   0.01 gaccuracy and calibrated电子秤/天平 0.25kg/0.01g   2    
8 Weighing   scale/balance,   25  kg  capacity,   1g  accuracy   and calibrated电子秤/天平 25 kg/1 g,   2    
9 Drying oven, 225 litre capacity, fan circulated, thermostatically controlled, 220-240v, 50/60Hz, single phase with 3 shelves and dial thermometer烘箱  225L(机械通风)   3    
10 Warm  air  drying  unit,  100°C max,220-240v,  50/60Hz,  single phase暖风干燥装置 最大100°C,220-240V,50/60Hz,单相   1    
11 Hotplate, 200mm diameter, 220-240v, 50/60Hz, single phase with Simerstat电热板 直径200 mm,220-240V,50/60Hz,单相   4    
12 Hotplate,  300 x 500 mm, digital  temperature  indicator  0-300 °C, 220-240v, 50/60Hz, single phase电热板 300 x 500 mm,数显温度指示器0-300°C,220-240V,50/60Hz,单相   1    
13 Set of Spatulas, 100mm length blade, 150mm length blade,  and 200mm length blade, 抹刀 100mm、150mm、200mm长各一把   6    
14 Chattaway spatula, 125mm blade方格铲,125mm刀片 125mm刀片   个  3    
15 Moisture  content tins含水率罐     个  100    
16 Sample trays 306 x 306 x 38 mm样品托盘 306 x 306 x 38 mm(镀锌钢制)   个  10    
17 Sample trays 406 x 406 x 50 mm样品托盘 406 x 406 x 50 mm(镀锌钢制)   个  10    
18 Sample trays 610 x 610 x 63 mm样品托盘 610 x 610 x 63 mm(镀锌钢制)   个  6    
19 Sample  splitter,  large capacity,100mm  down, 28.3  litre  hopper capacity样品分料器     1    
20 Riffle box, steel, 10 mm, 12 slots宽分样器及底盒, 钢制,槽宽10 mm,12槽   2    
21 Riffle box, steel, 25 mm, 10 slots宽分样器及底盒 钢制,槽宽25 mm,10槽   个  2    
22 Riffle box, steel, 50 mm, 8 slots宽分样器及底盒 钢制,槽宽50 mm,8槽   个  2    
23 Thermometer, min/max, double scale, -20 to +50 °C温度计 双刻度,-20至+50°C   个  4    
24 Thermometer, laboratory mercury ,to l l0 °C水银温度计 0至110°C   个  4    
25 Thermometer, surface,64 mm diameter, dial 0 to 160 °C表面温度计 直径64 mm,刻度盘0至160°C   个  1    
26 Thermometer, electronic potable digital,to 300 °C电子插入数显温度计 0至300°C   个  2    
27 Thermometer, digital probe, 50-300°C探针温度计 50-300°C(钢制)   个  2    
28 Timing Device计时表     个  3    
29 Gloves - heat resistant隔热手套     10    
30 Glass beakers, 100 mm, squat form with spout玻璃烧杯 100 mm   6    
31 Glass beakers, 600 m m, squat form with spout玻璃烧杯 600mm   6    
32 Glass beakers,  1000 m m,squat form with spout玻璃烧杯 1000mm   6    
33 Measuring cylinder, 100 x 1 ml, soda glass量筒 100 x 1 ml,(玻璃)   2    
34 Measuring cylinder, 250 x 2 ml, soda glass量筒 250 x 2 ml,(玻璃)   2    
35 Measuring cylinder, 500 x 5 ml, soda glass量筒 500 x 5 ml,(玻璃)   2    
36 Measuring cylinder, 1000 x I 0 ml, soda glass量筒 1000x 10 ml,(玻璃)   2    
37 Measuring cylinder, 100 x 1 ml, plastic量筒 100 x 5 ml,(塑料)   2    
38 Measuring cylinder, 250 x 2 ml, plastic量筒 250 x 2 ml,(塑料)   2    
39 Measuring cylinder, 500 x 5 ml, plastic量筒 500 x 5 ml,(塑料)   2    
40 Measuring cylinder,  1000 x 10 ml, plastic量筒 1000x 10 ml,(塑料)   2    
41 Evaporating dish, 100 mm dia x 40 mm depth蒸发皿 直径100mmx 40mm深   3    
42 Evaporating dish, 150 mm dia x 45 mm depth蒸发皿 直径150mmx 45mm深   3    
43 Evaporating dish, 200 mm dia x 55 mm depth蒸发皿 直径200mmx 55mm深   3    
44 Water test kit for chlorides, alkalinity and hardness氯化物、碱度和硬度的水试验套装     1    
45 Claw hammer爪锤     个  3    
46 Tool kit, multipurpose with box多用途工具箱     3    
47 Cross Section paper (Graphiquest Canson)-pad横截面纸     个  1    
48 Vacuum Pump真空泵 马歇尔最大理论密度   2    
49 Wash bottles洗瓶     个  20    
50 Pipettes, 5 ml, 10 ml, 20ml, 50 ml and 100 ml移液管 5ml、10ml、20ml、50ml、100ml。   3    
51 Pycnometer set suitable for SG and relative density measurement of soils and aggregates to ASTM D854-98适用于土壤和集料SG和相对密度测量的比重计装置, 符合ASTM D854-98   1    
52 Scoops, large for aggregate取样铲(碎石)     个  6    
53 Scoops, medium for sand取样铲(砂)     个  6    
54 Bulk Density measures, steel with capacity, 3 litre, 7 litre, 10 litre,15 litre and 30 litre, all with handles except for 3 litre container.体积密度测量,钢容量,3L,7L,10L,15L和3L升,除3L容器外,均配有把手。     1    
55 Field scale 2.6 kg电子天平 2.6kg/0.1g   3    
56 Field scale 20 kg电子天平 20kg/1g   3    
57 Soil colour chart土色卡     个  1    
58 Soil auger head, 100mm dia, heavy duty steel土壤螺旋钻头 直径100 mm,   个  1    
59 Soil auger head, 150mm dia, heavy duty steel土壤螺旋钻头 直径150 mm,   个  1    
60 Soil auger head, Dutch type, 50 mm, heavy duty steel土壤钻头 荷兰式,50 mm,重型钢   个  1    
61 Gravel auger head, !50mm dia, heavy duty steel砾石螺旋钻头 直径150 mm,重型钢   个  1    
62 Extension rods, 27mm dia, 1m length for use with auger heads, heavy duty steel钻杆 直径27mm,长度1m,用于螺旋钻头,重型钢   个  10    
63 Handle and T-piece for hand boring, heavy duty steel手动钻孔用手柄和T形件     个  2    
64 Jarring link for driving sample tubes驱动样品管的震击连杆     个  2    
65 Spiral auger, 40mm dia, one piece, heavy duty螺旋钻 直径40 mm,整体式,重型   个  1    
66 Sample tube, 38mm dia x 2 30mm long with end caps样品管 直径38mm,长230mm,带端盖   个  10    
67 Adaptor for extension rods延伸杆接头     个  2    
68 Rubber headed pestle and Porelain mortar suitable for sample reduction橡胶头杵和陶瓷砂浆 适用于样品还原   个  1    
69 Sample extruder, 38mm dia, hand-operated,  hydraulic complete with trimming knife, 38mm split former and cutting tool脱模器 直径38mm,手动、液压,配备切边刀、38mm对开成型器和切割工具。   1    
70 Sample extruder for 100mm and 150mm samples including frame and hydraulic jack脱模器,包括框架和液压千斤顶 100 mm和150 mm   1    
71 Moulds, core cutter and collar for 100mm dia and 150 mm dia samples for in-situ dry density and CBR determinations including driving dolly to fit the core cutter and driving rammer模具、芯刀和套环 用于现场干密度和CBR测定的直径为100 mm和直径为150 mm样品的 包括适合芯刀的驱动小车和驱动打夯机 个  10    
72 Melting pot, 4 litre capacity, 50 - 300°C range suitable for melting paraffin wax or capping compound熔化罐 4L,50-300°C范围,适用于熔化石蜡或盖面化合物   个  1    
73 Liquid limit apparatus to ASTM D423-66 with hard rubber base of shore D value  85-95 @ 23°C, grooving tool  and calibrating plate液限仪 符合ASTM D423-66的 带邵尔D值为85-95、23°C时的硬质橡胶底座、切槽工具和校准板。 2    
74 Ground glass plate, 250mm x 250mm磨砂玻璃板 250 mm x 250 mm   2    
75 Shrinkage troughs for bar linear shrinkage tests to SANS 3001-GR 10,  25mm x 25mm x 150mm long with paint brush, spatula and dividers with a millimeter scale收缩槽 符合SANS 3001-GR10标准,25 mm x 25 mm x 150 mm长,带有刷漆、抹刀和毫米级隔板。   个  10    
76 Compaction hammer, 4.536 kg, drop 457.2m111, 50.8 m111 dia.击实锤 4.536 kg,落距457.2 mm,直径50.8 mm   个  3    
77 Compaction hammer, 2.495 kg, drop 304.8mm, 50.8 111m dia击实锤 2.495 kg,落距304.8 mm,直径50.8 mm   3    
78 Moulds,  152.4 mm dia x 152.4 mm high, with detachable collar and base with a 25 .4 mm spacer plate to give an effective mould depth of 127mm击实筒 直径152.4 mm x高152.4 mm,带轴环和底座,带25.4 mm隔板,有效深度为127mm。   10    
79 Moulds, 101.6 mm dia x 116.43 111m high with detachable collarand base plate击实筒 直径101.6 mm x高116.43 mm,带轴环和底座   6    
80 A hydraulic compression testing 111achine with a capacity of at least 55kN load recordable to the nearest 50N and capable of applying load at a rate of strain of 1.27 mm/min, including a metal circular piston of 50 mm dia and weighing 4.536kg CBR压力试验仪带应力环 55kN,可记录到最近的50N,并能够以1.27mm/min的应变率施加荷载,包括直径为50 mm、重量为4.536 kg的金属圆形活塞。(CBR压力试验仪带应力环)   1    
81 Moulds, 152.4 mm dia x 152.4 111m high, with detachable collar and base with a 25.4 mm spacer plate to give an effctive mould depth of 127mm and perforated soaking base plates (also see item 87)CBR试模 直径152.4 mm x高152.4 mm,轴环和底座,带有25.4 mm隔板,有效模具深度为127mm,以及穿孔均热底板(另见项目87)   个  21    
82 Annular 4.536 kg surcharge weights used during soaking环形4.536 kg附加砝码 CBR浸泡期间使用   个  21    
83 Annular 5.56 kg surcharge weights for use during penetration附加砝码 环形5.56 kg   个  21    
84 1.024 kg perforated plates with adjustable stems穿孔板 1.024 kg带可调杆的   个  21    
85 A tripod for measuring swell三脚架 膨胀率用   个  21    
86 Dial gauges reading 0.01 mm with a range of 25mm百分表 0.01 mm,范围25 mm   个  12    
87 Dial gauges or equivalent with 0.127mm division, ranger 25mm and 1.27mm per revolution 百分表 刻度为0.127 mm,每转范围为25 mm和1.27 mm   个  2    
88 Copper or brass gauze discs of 30 mesh and 170 dia.铜或黄铜纱布盘     个  10    
89 Galvanised iron mixing bath, 450mm x 650mm x 200mm deep镀锌钢盘 450 mm x 650 mm x 200 mm   个  1    
90 Soaking bath, 300mm deep浸泡槽,300 mm深     个  1    
91 Dynamic Cone Penetromate, complete with 10 NO treaded extension rods, 5NO. Spare cones and carrying case 轻型动态贯入仪   配有10个螺纹延长杆、5个备用圆锥和手提箱。 2    
92 DCP Software packageDCP软件包     1    
93 Sand density device/funne/bottle with accessories including a density ring witth a 152mm dia hole for AASHTO T296 T297含附件的砂密度装置/漏斗/瓶子 包括一个直径为152 mm的密度环,用于STM D1556或AASHTO T296 T297。(土三轴压缩试验)   2    
94 Calibration sieves, 0.425mm and 0.25mm校准方孔筛 0.425 mm和0.25 mm   1    
95 Cylindrical calibration container, internal diameter and height 152mm砂子标定罐 内径和高度152mm   个  1    
96 Chisel, cold steel 25 mm凿子 冷钢25 mm   个  2    
97 Tablespoons大勺     个  4    
98 Containers, tins of 5 litre capacity容器、罐 5L   个  10    
99 Aggregate Impact Value Devic to BS 812, including cylinder and tamping rod集料冲击值装置 符合BS 812 包括圆筒和捣固杆 1    
100 Compression machine, hydraulic,capable of applying a load of (400-2000)kN at a uniform  rate so that the load can be reached in 10 mins suitable for Aggregate Crushing Value (ACV) and 10% Fine Aggregate Crushing Test (10% FACT) testing, including an open- ended steel cylinder of 150 mm dia with plunger and base plate, a cylindrical measure of 155 mm x 180 mm deep and metal tamping rod 16 mm dia, 500 mm long with a hemispherical end.混凝土压力试验机 能够以均匀的速度施加400千牛的载荷,以便在10分钟内达到适合于集料压碎值(ACV)和10%细集料压碎试验(10%事实)的载荷,包括直径为150 mm的开口钢筒(带柱塞和底板),圆柱形测量155 mm x 180 mm深的金属捣固杆,直径16 mm,长500 mm,带半球形端。   1    
101 Flakiness index gauge of metal  1.6 mm thick having rectangular slots for each size fraction of aggregate to be tested针片状含量规准仪   用于测试每种尺寸的集料。 1    
102 Average Least Dimension (ALD) Device平均最小尺寸(ALD)装置     1    
103 Los Angeles Abrasion machine includ ing charges洛杉矶磨耗机   包含12个钢球 1    
104 Durability Mill, including charges耐崩解仪     1    
105 Concrete test cube moulds 150mm x 150mm x 150mm, including tamping bars/rods混凝土立方体试块模具 150 mm x 150 mm x 150 mm,包括捣固棒/杆   24    
106 Curing  tanks,  thermostatically   controlled,  minimum  600  mm square and 500 mm deep养护箱 恒温控制,最小600平方毫米和500毫米深   4    
107 Coring device with the capability of taking 100mm and 150mm diameter cores from cementitious and bituminous materials取芯机 直径为100 mm和150 mm的芯。   1    
108 Cylinder moulds 100mm diameter x 200mm long for ITS and UCS testing圆筒试模 用于ITS和UCS测试的直径100 mm x 200 mm长的(塑料)   6    
109 Cylinder moulds 150mm diameter x 300mm long for ITS and UCS testing圆筒试模 用于ITS和UCS测试的直径150 mm x长300 mm的(塑料)   6    
110 Slump test device, cone and tamping rod坍落度筒、捣棒     2    
111 Concrete Test Hammer (Schmidt Hammer or similar)混凝土回弹仪     1    
112 Straight edge标尺     3    
113 Sand Equivalent Test Set砂当量全套装置     1    
114 Sand Equivalent Stock Solution ( 1 kg)砂当量用溶液     kg 10    
115 Bitumen extraction machine, centrifuge type, 3000gm capacity, electrically operated having Dimmerstat for controlling speed from 2400 to 3600rpm with pack of Filter Paper (50 Circles)沥青含量抽提仪   5包抽提滤纸 1    
116 Beakers for above烧杯     6    
117 BI-metal thermometer (0 - 300 °C) 100 and 300 mm插入式温度计     6    
118 Electrical thermometer (0 -300 °C)电子数显温度计     2    
119 0.10 m core drilling machine with 12 core drills0.10 m钻芯机 配12个钻芯   1    
120 0.5 lt Sample Can取样罐     24    
121 0.5 It Small Mouth Can缩口取样罐     24    
122 Bitumen Penetrometer with 5 needles and sample holders针入度仪   5只针(最好多于5只) 1    
123 Softening point devices including heating system软化点装置   包括加热系统 1    
124 Brookfield viscometer and associated apparatus布氏粘度仪     1    
125 Rolling Tin Film Oven and associated apparatus Marshall Test旋转薄膜烘箱及相关设备     1    
126 Bench Mixer, 5 lt capacity with bowl heater and whisk台式搅拌机 5L,带碗加热器和搅拌器 用于马歇尔试验 1    
127 Stirring Road搅拌棒     2    
128 Automatic Marshall compaction machine with hummer and pedestal马歇尔自动击实仪     2    
129 Marshall compaction moulds马歇尔试模具   (含底座、盖) 12    
130 Filter paper for moulds马歇尔滤纸   300张 20    
131 Compression Machine, hydraulic, 50 KN capactiy with calibrated load ring, flow and stability gauges and stability breaking head马歇尔稳定度仪 容量50千牛,带校准的负荷环、流值和稳定仪表以及稳定破碎头   1    
132 Sample ejecting device样品喷射装置     1    
133 Thermostatically controlled Standard Wter Bath to 60°C马歇尔恒温控制标准水浴至60°C   是否重复 1    
134 Balance, water container and basket for bulk relative density and void content of compacted bitumen mixtures压实沥青混合料体积相对密度和空隙率用天平、水容器和篮子     1    
135 Sand absorption cone and tamper饱和面干模     1    
136 Space disk 50mm thickCBR 垫块 厚50mm   1    
137 Sand Pouring Cylinder 150 mm dia.灌砂筒  直径150mm   3    
138 Tray 150 mm hole  .灌砂筒底盘 150mm 3个直径150mm 3    
139 Weighing   scale/balance,   150 kg  capacity,   1kg  accuracy   and calibrated电子秤(台秤) 150 kg/5 g,已校准   1    
140 Weighing   scale/balance,   25  kg  capacity,   1g  accuracy   and calibrated电子秤/天平 30 kg/0.5 g,已校准   3    
141 Vacuum regulator, complete with vacuum gauge dia. 80mm真空泵调节器     2    
142 Condensed water trap凝结水阱     2    
143 Vacuum pyknometer 10 liters capacity沥青混凝土最大理论密度仪 10L   6    
144 Set of ASTM stainless steel Sieves diameter 200 mm including, but not limited to, the following aperture sizes: 25mm; 20mm; 13.2mm; 10mm; 6.7mm; 5.9mm; 5.0mm; 3.35mm; 2.36mm; 1.18mm, including lid and receiver.方孔筛,包括筛盖和筛底。 ASTM不锈钢直径200 mm的,孔径:25mm; 20mm; 13.2mm; 10mm; 6.7mm; 5.9mm; 5.0mm; 3.35mm; 2.36mm; 1.18mm   2    
               
               
               
合计        

 

本文链接: https://www.dgjayq.com/yy/28.html
本页标签: 出口公路仪器
上一篇:没有了
[返回]